T-Motor MN4010 to MN5212 flange (ø4 + 3×M3 on ø17): prop hub dimensions
The fit dimensions PropShaper uses for drone and RC propellers on this mount, with the sources behind them. Open it in the studio to design a propeller around this hub and export an STL for printing.
Dimensions
| Shaft bore | ø4.1 mm |
| Screws | 3 × ø3.2 mm holes on a ø17 mm bolt circle |
| Hub body | ø24.5 mm × 7 mm long |
Source quality: Manufacturer drawing or CAD.
Fit notes
From the T-Motor MN4010/MN4014/MN5208/MN5212 2D drawings: ø4 shaft and three M3 on a ø17 bolt circle (the supplied adapter flange is ø24.5). Hub height conventional.
Sources
Every dimension stays editable in the studio, so you can adjust the bore or add a set screw to match your own hardware. Printed props are prototypes: check the fit on the bench and spin them up behind a guard.